ThermoFlex®TURBO Brights
fabrics
Cotton, Uncoated Polyester, Fabric Blends, Spandex, Wool, Linen, and Nylon
sizing
Available Widths (in.):
15” and 20”
Available Lengths (ft.):
15’, 30’, 45’, 60’, 90’, and 150’ rolls
thickness
4 mils/100 microns
• HTV that adheres to a wide variety of fabrics, including nylon
• A quick press and goes on at a low temperature, making it faster to use than other products
• Has amazing metallic shimmer
• Durable, soft, and easy to cut and weed
Want ThermoFlex® Turbo but with a beautiful shine? Check out ThermoFlex® Turbo Brights!
This is a universal product, adhering to multiple fabrics, including cotton, polyester, cotton/polyester blends, and nylon. That’s right, nylon! The ThermoFlex® Turbo Brights line also have a metallic shine.
This product is durable, weeds easily, and has a soft hand and strong grip. It discourages dye-migration since it has a low heat and has a quick press time. This also eliminates press marks! It has a pressure-sensitive carrier, which enables easy weeding and re-positioning.
Application Instructions
IT'S BEST TO TEST!
For Cotton, Polyester, and Cotton/Polyester Blends
CUTTING
45° Blade
MIRRORING
Cut this material into a mirror image.
TEMPERATURE
270° F
PRESSING
Medium Pressure
TIMING
5 seconds
PEELING
Peel warm.
WASHING
Turn inside-out, wash warm, regular cycle, mild detergent. Do not use bleach. Tumble dry normal. Do not iron directly onto this material. Suitable for dry-cleaning.
LAYERABLE?
Top layer only
For nylon
CUTTING
45° Blade
MIRRORING
Cut this material into a mirror image.
TEMPERATURE
300° F
PRESSING
Medium Pressure
TIMING
Pre-press garment for 5 seconds, then press the design for 5 seconds.
PEELING
Peel warm, cover with a silicone sheet and repress for 10 seconds.
WASHING
Turn inside-out, wash warm, regular cycle, mild detergent. Do not use bleach. Tumble dry normal. Do not iron directly onto this material. Suitable for dry-cleaning.
LAYERABLE?
Top layer only
Tech Info
Tech PDF includes product thickness, roll sizing, and other technical information
If you’re using this product for the first time or trying a new garment, it’s always best to test on an inconspicuous area or spare garment before applying final production.
Cut Settings
PLEASE NOTE: Every blade and machine is a little bit different- always remember to test cut! These cut settings are a starting point to be adjusted to your blade and machine.
Cricut
- Material: Vinyl
- Pressure: Default
- Blade: Fine-Point Blade
Silhouette
- Material: Heat Transfer, Smooth
- Blade: 3
- Speed: 8
- Force: 6
Graphtec
- Speed: 8
- Force: 14
We use a 45° blade.
Product Videos
Product Colors
Mouse over the swatches for product name and number!