fabrics
sizing
Available Widths (in.):
19.5” only
Available Lengths (ft.):
15’, 30’, 45’, 60’, 90’, and 162’ rolls
thickness
3 mils/75 microns
• Gives a smooth and soft finish, looks like metallic screenprint
• Has over 40 colors and patterns
• Stretchy and durable
• Sticky carrier for easy repositioning
Need to add perceived value to your fashion designs with the brilliant accent of precious metals? Try our DecoFilm® Soft Metallics! It offers a smooth and soft metallic finish. It is stretchy, very durable, and comes in many different finishes and patterns. It offers a soft hand and when applied, will take on the texture of the garment.
LASER compatible
Tech Info
Tech PDF includes product thickness, roll sizing, and other technical information
Cut Settings
PLEASE NOTE: Every blade and machine is a little bit different- always remember to test cut! These cut settings are a starting point to be adjusted to your blade and machine.
Cricut
- Material: Iron-On
- Pressure: Default
- Blade: Fine-Point Blade
Silhouette
- Material: Heat Transfer, Smooth
- Blade: 2
- Speed: 8
- Force: 6
Graphtec
- Speed: 8
- Force: 12
We use a 45° blade.
Product Videos
Application Instructions
IT'S BEST TO TEST!
If you’re using this product for the first time or trying a new garment, it’s always best to test on an inconspicuous area or spare garment before applying final production.
45° Blade
Cut this material into a mirror image.
302°-320° F
Firm Pressure
7-8 seconds
Peel cold, then cover with a PTFE sheet and repress for 3-5 seconds.
Wash inside-out, cold water, gentle cycle. Tumble dry low.
Top layer only
After washing, always iron inside out. Do not iron directly on the film. Please note: repressing keeps material looking consistent throughout wash cycles, but will give it more of a brushed metal appearance.
Splices in rolls may cause material to conform around edges of tape, but will not affect the cutting or the finished look.
Please note: the White is translucent. The following colors are translucent in some areas and the garment color will show through: Green/Black Camo, Earthtone Camo, Grey Camo, Blue/Black Camo. The following colors are slightly translucent, but does not allow color to show through when pressed: Rainbow Oil, Leopard Silver, and Leopard Gold.
Please note: the Holoshine colors have a horizontal line going down the middle of the roll and a vertical line approx. every 29.5″. Is is part of the manufacturing process and is not a defect.
Product Colors
Mouse over the swatches for product name and number!
Color Palette Download
Includes palettes for DecoFilm, Embossed DecoFilm, DecoFilm Soft Metallics, and DecoFilm Paint FX.