sizing
Available Widths (in.):
19” only
Chameleon Reflective Black (in.):
17.5” only
Available Lengths (ft.):
15’, 30’, 45’, 60’, 75’, 90’, & 162’ rolls
thickness
Chameleon Black:
7.2 mils/180 microns
RD 300 series:
7.5 mils/190 microns
• Used for nighttime visibility
• Made with very small glass beads in a layer of polyester film
• RD 200 & 300 Series: sticky carrier RSMK Series: no sticky carrier
• RMSK & RD 200 Series have a heat liner, remove before cutting
If you want to shine even at night, you want Reflection Decoration™! Use Reflection Decoration™ for nighttime visibility and brilliance in the spotlight.
These films consist of very small glass beads embedded in a layer of polyester film to reflect almost all the light that shines on them. The RD Series has a slightly sticky carrier.
*Please note: For certified safety colors, please go to our Reflection Protection page HERE.
LASER compatible
Application Instructions
IT'S BEST TO TEST!
If you’re using this product for the first time or trying a new garment, it’s always best to test on an inconspicuous area or spare garment before applying final production.
for 300 Series and Chameleon Reflective Black
PRESSING
Firm Pressure
TIMING
8 seconds
PEELING
Peel HOT! Wait 2 seconds then peel.
WASHING
Wash inside-out, warm water, normal cycle. No bleach. Tumble dry low heat. NOT suitable for dry-cleaning or steam cleaning. Do not iron directly onto the reflective vinyl.
Top layer only
for RMSK & 200 Series
PEEL – Warm, cover with PTFE and repress for 10-15 seconds, let cool then remove PTFE
Top layer only
Tech Info
Tech PDF includes product thickness, roll sizing, and other technical information
Cut Settings
PLEASE NOTE: Every blade and machine is a little bit different- always remember to test cut! These cut settings are a starting point to be adjusted to your blade and machine.
For RMSK & 200 Series, remove liner before plotting
Cricut
- Material: Iron On+
- Pressure: Default
- Blade: Fine-Point Blade
Silhouette
- Material: Heat Transfer, Smooth
- Blade: 3
- Speed: 8
- Force: 10
Graphtec
- Speed: 8
- Force: 16
We use a 60° blade.
Product Colors
Mouse over the swatches for product name and number!
- All
- RMSK
- 200 Series
- 300 Series