fabrics
Cotton, Uncoated Polyester, Fabric Blends, Spandex, Lycra, Wool, Linen, and Nylon
sizing
Available Widths (in.):
12”*, 15”, and 20”
Available Lengths (ft.):
15’, 30’, 45’, 60’, 90’, and 150’ rolls
(*12” x 150’ only)
thickness
3.7 mils/95 microns
• An HTV that you can write on with chalk
• Can be applied to a wide variety of materials, including nylon
• A fast press similar to ThermoFlex® Turbo
• Can layer
The chalkboard trend has expanded to HTV with Chalkboard!
Add a fun chalk-ready surface to any cotton, poly, or uncoated nylon fabric. It presses on fast just like ThermoFlex® Turbo and will show off any writing done in chalk until you wipe it away.
LASER compatible
Application Instructions
IT'S BEST TO TEST!
If you’re using this product for the first time or trying a new garment, it’s always best to test on an inconspicuous area or spare garment before applying final production.
For Cotton, Polyester, and Cotton/Polyester Blends
CUTTING
45° Blade
MIRRORING
Cut this material into a mirror image.
TEMPERATURE
270° F
PRESSING
Medium Pressure
TIMING
5 seconds
PEELING
Peel warm.
WASHING
Wash inside-out, normal settings. Do not exceed 212° F in the dryer. Suitable for dry-cleaning.
LAYERABLE?
Yes
For nylon
CUTTING
45° Blade
MIRRORING
Cut this material into a mirror image.
TEMPERATURE
300° F
PRESSING
Low Pressure
TIMING
Pre-press garment for 5 seconds, press material for 5 seconds.
PEELING
Peel warm, cover with a silicone sheet and repress for 10 seconds.
WASHING
Turn inside-out, wash warm, regular cycle, mild detergent. No bleach. Tumble dry normal. Do not iron material. Suitable for dry-cleaning.
LAYERABLE?
Yes
Tech Info
Tech PDF includes product thickness, roll sizing, and other technical information
Cut Settings
PLEASE NOTE: Every blade and machine is a little bit different- always remember to test cut! These cut settings are a starting point to be adjusted to your blade and machine.
Cricut
- Material: Vinyl
- Pressure: Default
- Blade: Fine-Point Blade
Silhouette
- Material: Heat Transfer, Smooth
- Blade: 3
- Speed: 8
- Force: 6
Graphtec
- Speed: 8
- Force: 14
We use a 45° blade.
Product Colors
Mouse over the swatches for product name and number!